HP-CWT-XX-W122-5 Shrink Solder Seal Sleeve With Lead

HP-CWT-XX-W122-5 Shrink Solder Seal Sleeve With Lead

■Shrink Solder Seal Sleeve with lead-XLPE Green AWG22 (Non-Rohs).These controlled soldering devices are designed for termination of a bare or tin-plated copper shield on a cable having an insulation rated for at least +85°C, meeting the dimensional criteria listed in the table above.One piece with lead design, it consists of transparent heat shrinkable sleeve and fluxed solder.

Product details

■ Application:

Transparent insulation sleeve provides encapsulation,inspect, strain relief, and insulation .Pre-fluxed solder provides controlled soldering process.These controlled soldering devices are designed for termination of a bare or tin-plated copper shield on a cable having an insulation rated for at least +85°C, meeting the dimensional criteria listed in the table above.
 One piece with lead design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides insulation and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to component terminals, such as motor tabs, connector pins, and switch terminals,it is very convenience to use the exact wire dimension.

■ Characteristics:

●Shrinkage ratio 2:1
 ●Waterproof for wiring splices
 ●Transparent sleeve provides precise inspection
 ●Easy control soldering process      
 ●Minimum Shrink Temp. 60℃
 ●Minimum Fully Recover Temp.110℃
 ●Fully melt temperature of solder: 138℃

;

 

 

■ Technical Data:

 
Operating temperature-55℃~125℃
voltage Resistant >600V
Protection typeIP67
Volume Resistivity (Ω cm)≥10 15
Dielectric Strength (KV/mm)≥25

■ Size:      

 

 

 
 

 
Product CodeProduct DimensionsCable Dimensions
Φ A Min (mm)

Φ B Min (mm)

L Max (mm)

Φ D Max (mm)Φ E Min (mm)Φ F Min (mm)Φ G Max (mm)J
HP-CWT-3-W122-52.5(0.098)3(0.118)24.5(0.965)3(0.118)
1.5(0.059)1(0.04)2.5(0.098)

7.00±0.50

(0.276±0.020)

HP-CWT-5-W122-54.3(0.169)4.8(0.189)29.3(1.154)4.8(0.189)2(0.079)1.5(0.059)4.3(0.169)

9.00±0.50

(0.354±0.020)

HP-CWT-6-W122-56(0.236)6.7(0.264)32(1.26)6.7(0.264)
3.3(0.13)2.8(0.11)6(0.236)

10.00±0.50

(0.394±0.020)

HP-CWT-7-W122-56.4(0.252)7.3(0.287)32.5(1.28)7.3(0.287)3.3(0.13)2.8(0.11)6.4(0.252)

12.00±1.00

(0.472±0.040)

HP-CWT-9-W122-58.7(0.343)9.2(0.362)35.5(1.398)9.2(0.362)
4.5(0.177)4(0.157)8.7(0.343)

13.00±1.00

(0.512±0.040)

HP-CWT-11-W122-510(0.394)11.5(0.453)35.5(1.398)11.5(0.453)4.5(0.177)4(0.157)10(0.394)

13.00±1.00

(0.512±0.040)

HP-CWT-13-W122-713(0.512)15(0.591)45.5(1.791)15(0.591)7(0.276)6.5(0.256)13(0.512)

17.00±1.00

(0.669±0.040)

Other sizes are available upon request.

●Item 1 : Heat shrinkable Sleeve , Transparent ,Radiation cross-linked modified polyolefin.
 ●Item 2:  Solder Ring with flux.
●Item 3: Glue rings


 ■Color:
 Standard color: White, Red, Blue,Yellow
 Other colors are available upon request.

Hot Tags: HP-CWT-XX-W122-5 Shrink Solder Seal Sleeve With Lead,Rohs Solder Seal Sleeve
Related Products
Feedback

Feedback

Contact Us

Address:Floor 4, Building 12, Lane 1755 Wenbei Rd., Nanxiang Town, Jiading District,Shanghai,China

Tel: +86-21-69927650

Fax: 86-021-69927652

E-mail: export@hampool.com

CopyRight© Hampool Enterprise Co.,Ltd