shrink soldersleeve

• 

  Contact NowHP-SST-SGRS-00 Solder Seal Grip Device Stub Splice■Solder Seal Grip Device Stub Splice (RoHS) is transparent insulation sleeve provides encapsulation, inspect, strain relief, and insulation, Pre-fluxed solder provides controlled soldering process,the solder in this kind of product is RoHS required.

• 

  Contact NowHP-SST-150-X High Temperature Shrink Solder Seal Sleeve■ High Temperature Shrink Solder Seal Sleeve combined by high temperature PVDF shrinkable sleeve and preassembled earth conductor, the solder terminal is specially used for shielding and insulating high temperature electric wires and cables with tinplated or silver plated terminal, and meets requirements of SAE-AS83519/2 and VG95343-101.

• 

  Contact NowHP-SST-D-103 High Temperature Shrink Solder Seal Sleeve■High Temperature Shrink Solder Seal Sleeve combined by high temperature PVDF shrinkable sleeve and preassembled earth conductor, the solder terminal is specially used for shielding and insulating high temperature electric wires and cables with tinplated or silver plated terminal, solder in red color.

• 

  Contact NowHP-SST-105-SD Shrink Step-Down Solder Seal Sleeve■Our heat shrink Step-down Solder Seal Sleeve（Non-RoHS) is one piece design, PE shrink tubing,with one solder ring,two different color,different size glue ring,the solder in this kind of product is soft and better product performance.solder Seal Sleeve provides insulation and lower the installed cost.

• 

  Contact NowHP-SST-205 Shrink Solder Seal Sleeve■ Our heat shrink Solder Seal Sleeve（Non-RoHS) is two piece design, with one solder ring,two different color glue ring,the solder in this kind of product is soft and better product performance.solder Seal Sleeve provides insulation and lower the installed cost.We keep this product in enough store,we can arrange send it within 1 week.

• 

  Contact NowHP-SST-105 Shrink Solder Seal Sleeve■ Our heat shrink Solder Seal Sleeve（Non-RoHS) is one piece design, PE shrink tubing,with one solder ring,two same color glue ring,the solder in this kind of product is soft and better product performance.solder Seal Sleeve provides insulation and lower the installed cost.We keep this product in enough store,we can arrange send it within 1 week.

• 

  Contact NowHP-SST-300 Shrink Solder Seal Sleeve■Our heat shrink Solder Seal Sleeve (RoHS) is one piece design, PE shrink tubing,with three solder ring,two same color glue ring,the solder in this kind of product is RoHS required.Solder Seal Sleeve provides insulation and lower the installed cost.We keep this product in enough store,we can arrange send it within 1 week.

• 

  Contact NowHP-SST-SGRS-05 Solder Seal Grip Device Stub SpliceSolder Seal Grip Device Stub Splice (Non-RoHS) is transparent insulation sleeve provides encapsulation, inspect, strain relief, and insulation,Pre-fluxed solder provides controlled soldering process,the solder in this kind of product is soft and better product performance.

• 

  Contact NowHP-CWT-XX-W122-5 Shrink Solder Seal Sleeve With Lead■Shrink Solder Seal Sleeve with lead-XLPE Green AWG22 (Non-Rohs).These controlled soldering devices are designed for termination of a bare or tin-plated copper shield on a cable having an insulation rated for at least +85°C, meeting the dimensional criteria listed in the table above.One piece with lead design, it consists of transparent heat shrinkable sleeve and fluxed solder.

• 

  Contact NowHP-SST-D05 Dual wall Solder Seal Sleeve■ Our heat shrink dual wall Solder Seal Sleeve（Non-RoHS) is one piece design, polyolefin shrink tubing with adhesive,the tubing for this product is in 4 different color,the solder in this kind of product is soft and better product performance.solder Seal Sleeve provides insulation and lower the installed cost.